This PCI Express based serial adapter card allows you to turn a PCI Express slot into two RS232 (DB9) serial connections.
_x000D_
The adapter card is based on a native single chip design that allows you to harness the full capability of PCI Express (PCIe) - providing optimum reliability and speed.
_x000D_
The RS232 Serial Adapter Card is compatible with a broad range of operating systems, including Windows 2000/XP/2003/Vista, Linux Kernel 2.6.11 and up, as well as MAC OS 10.4 and above.
_x000D_
Plus, the adapter card includes an optional low profile bracket that allows the card to be installed in virtually any computer case – making it that much easier to add serial ports to a PCI Express enabled computer, regardless of the size of the computer case.
_x000D_
Features:_x000D_
128-byte deep FIFO per transmitter and receiver
_x000D_
_x000D_
Automated in-band software flow control using programmable Xon/Xoff in both directions
_x000D_
_x000D_
Automated out-of-band hardware flow control using Tx/Rx/RTS/CTS/DSR/DTR/DCD/RI/GND
_x000D_
_x000D_
Compliant with IEEE1284, SPP/EPP/ECP parallel port
_x000D_
_x000D_
Compliant with PCI Express base specifications revision 1.0a
_x000D_
_x000D_
High Performance Dual Channel Oxford 950 UART
_x000D_
_x000D_
Native single-Chip, single lane PCI Express
_x000D_
_x000D_
Selectable power output on pin 9 for the serial port
_x000D_
_x000D_
Two high speed RS-232 serial ports with data transfer rate up to 460.8 Kbps_x000D_
Port: 2 x 9-pin DB-9 Male RS-232 Serial_x000D_
Package:_x000D_
1 x 2-Port RS232 PCI Series Adapter/1 x CD driver
_x000D_
_x000D_
WARNING: The solder used in this product contains lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and circuit boards and avoid inhalation of fumes if heating the solder.